FreedConn TCOM VB Motorcycle Helmet Intercom Bluetooth 5.0 Headset Headphone FM Moto Interphone Helmet Communicator Speaker Gift

Note for EU Customer: Due to the change of VAT Policy If your order’s value is over €150，we would suggest to place orders separately to pay the VAT in first, or the order will be held by the custom office when it arrives at your country and still need to pay the VAT, it will take much more time to get the product.

Specifications

wired bluetooth Handsfree Headset

1.Advanced A2DP & EDR bluetooth profile

4.Could be connected with GPS

5.Up to 7 hours talking time

6.Up to 120 Km working speed

7.Wind noise DSP cancellation

8.Water-resistance,all weather-Perfectly Work

Main features

Bike-to-bike intercom for rider& passenger or two separate bikes up to 100 Meters in open Space

Up to 6 hours talk time when using the intercom feature.

Up to 300 hours standby

(2) Call out, call answer, call reject, call hang up.

(4) Dial the last number

(5) Support audio transfer.

(9) With DSP echo cancellation and noise suppression technology, crystal clear voice quality is guaranteed in a high speed.

(10) Button panel is water-proof and sun-proof, while the design is durable.

Last but not least, the device offers biker-tobikerintercom communication.

New Arrive FreedConn T-Com VB New bluetooth 5.0 Bluetooth Motorcycle Helmet

The USB charging port has been upgrated from 8pin to 5pin, it is more convenient to charge

Hard & Soft Cable Microphone Into One Earphone

3 Ways Conference Intercom

Support 3 Riders connect, 2 people talk at the same time

High Compatibility

Support to connet with 2 phones, MP3, Gps and other bluetooth devices.

Suitable For Different Helmets

Real Photos

Please note:the helmet is not included in the package!

One Set Package List (Quantity is optional)

FreedConn T-com VB Bluetooth Device X 1

Ear Speaker& Microphone X 1

Headphone Velcro X 1

Vecro Clip X 1

Hook Clip X 1

Screw driver X 1

USB Charge Cable X 1

User Manual X 1

Packing Box X 1

Two Sets Package List (Quantity is optional)

FreedConn T-com VB Bluetooth Device X 2

Ear Speaker& Microphone X 2

Headphone Velcro X 2

Vecro Clip X 2

Hook Clip X 2

Screw driver X 2

USB Charge Cable X 2

User Manual X 2

Packing Box X 2

This package is for the new 2021 TCOM VB walkie-talkies and can be paired with older TCOM VB walkie-talkies.

Bike-to-bike intercom for rider& passenger or two separate bikes up to 1000 Meters in open Space.

Up to 300 hours standby.

(4) Dial the last number.

Special Feature

FM Radio Function

Support 3 riders connection,2 riders talking at the same time

1000 meters Max talking range, up to 120Km/h working speed

Support to Smartphone, mp3, GPS, with HIFI Stereo Earphone.

Note for EU Customer

Due to the change of VAT Policy

If your order’s value is over €150 ，we would suggest to place orders separately to pay the VAT in first, or the order will be held by the custom office when it arrives at your country and still need to pay the VAT, it will take much more time to get the product.

2. Now you need to attach the speaker and microphone arm to the inside of the helmet. Take the Velcro pad which the speaker will attach to, and test for the best position to fix it. The Velcro Pad should be fixed at the height of your ear in the helmets ear pocket. You will need to put the helmet on a few times to find the optimum position to apply the pad. When the correct positioning is found, remove the protective strip and apply the Velcro Pad.

3. Next, take the Ear Speaker and attach it to the Velcro Pad. Run the Microphone Arm down along down to where your mouth will be. As the Microphone Arm is flexible, you can adjust it so it sits in the optimum position in front of your mouth. Some helmets have removable padding; if yours does, it is recommended to run the speaker and microphone under the padding.

4. Taking care to match the pins up, connect the Headset Plug to the Headset Socket. The plug can only be inserted in one position.

Turning the unit on into standby mode

Press and hold the small black power button at the end of the unit. After 3 sec you will hear a “Di” and the blue LED will begin to flash. Let go of the button and the unit is now in standby mode.

Turning off the unit

Press the small black power button for 5 seconds or until you hear 2 “Di” tones and the lights extinguish.

To Pair 2 devices in intercom mode

When both devices are turned off, press and hold the small black power button on both devices until both units flash red/blue repeatedly. You need to hold the button for more than 6 seconds and dont let go when you see the blue light.

Short press the black power button on ONE of the two devices and this device will search and auto-pair to the other in intercom mode. A live call will be initiated.

If this fails retry it ensuring both red/blue light sequences are initiated simultaneously and are close together. Also ensure any other Bluetooth devices are turned off.

When paired, you do not need to go into pairing mode again. In future you only need to go into standby mode (blue light flashing) on both units and press the button on one of the devices.

To Pair 3 devices in intercom mode

Follow the above procedure for each combination of the three units. (A-B, B-C, A-C).

Ensure the third unit is switched off when pairing the other two devices.

Only 1 connection can be live at a time. When successfully paired the connections can be switched by ending any live call and returning to standby.

From Standby press the power/intercom button 1 time for one of the pairings to be called, or 2 times for the other pairing to be called.

The pairing for 1 or 2 presses will depend on the sequence in which you paired the 3 helmets, but once paired the relevant pairings will maintain the number.

i.e. A will press the power/intercom button 1 time to call B and 2 times to call C. B will press the button 1 time to call C and 2 times to call A. C will press the button 1 time to call A and 2 times to call C.