WiFi Controller AC220V Electric Linear Actuator 300kgs Engine Motor System Automatic Swing Gate Opener with Dual Thick Arms KIT

(Regarding the bearing capacity, if you use solar energy 24VDC, then the maximum bearing capacity is 150KG, using 110VAC will reach 200KG, 220VAC maximum load 250KG. The minimum value is marked in the manual.)

WiFi Controller AC220V Electric Linear Actuator 300kgs Engine Motor System Automatic Swing Gate Opener with Dual Thick Arms KIT

List Of Kit Package

All kits are complete kits with different accessories. The content of the selected kit items will be shown in the picture.(Different content is shown in photos)

Produrct Feacture

1.Easy to install and operate,and easy to connect wired.

2.Open and close the gate by remote control and keypad.

3.Time promotation function.when open gate,speed is slow,then a little quick,and when close the door,speed is slow again.

4.In case of power failure,release the clutch easily,and can operate the gate manually.

5.Stop working when gate meets with obstacle.

6.Rod's max travel is 300mm.

7.Motor's Poweer: 24VDC 40W

8.Running Speed:1.6cm/s

9.Run travel: 300mm

10. Max single leaf gate width: 2.5M

11.Max single leaf gate weight: 250KG

Standad KIT Components

Accessories optional, select color kit shown in photo

In some countries the cold climate, we add antifreeze oil inside the motor, It can work in cold environment.

Full kit include Necessary installation accessories

Control Box Details

The conventional control box cannot be equipped with a spare battery. The large box can be loaded with a spare battery. The battery is not included.

Remote Control 23A12V Battery is Not Included

Most of our goods are transported by Fedex, UPS, DHL, etc. express delivery.For the safety of the entire cargo and the aircraft, the shipment is not allowed to have batteries.Please buy it locally in advance

Control Box Outdoor Waterproof Design

The closed control bin, IP65 waterproof rating, can directly face harsh weather conditions.-20 ℃ ~ + 50 ℃

Extra Security IR Photocells(Optional Accessories)

The system itself has impact rebound function.For more secure protection, some users can be added photocells sensor.for Outward gate.when the gate close,cut IR or the kid run through the Closing gate,the gate will be open.

Flashing Warning Light(Optional Accessories)

When the door opener is turned on at night, the flash can alert intruders in the dark.(The color of the lamp is optional. Pay attention to the color when placing the order.)

Wireless Password Keypad(Optional Accessories)

When there are many people in your family, then you need a keyboard. As long as you know the password, gate will open the door for the master.

The Remote Control in Car(Optional Accessories)

There are too many keys in life today, and my belt is full, which is simply a burden.

Don't worry, the remote control button inside the car is hung on the sun visor, and it is more convenient to open the door

Wifi Control Module(Optional Accessories)

GSM Remote Control/WIFI Camera(Optional Accessories)

The camera is a separate app and needs to be connected to the Internet. In order to see the working status of the gate and record security, optional accessories

Gate Lock(Optional Accessories)

In order to ensure the safety of the door and prevent the door from being blown by the strong wind, please use additional door locks, automatic door locks.remote control open the lock and gate same time.

But the DC12V RFID lock,this is for side door,not same time to open,It is independent, but the power supply of the control box can be used.

Support for Solar Systems(Optional Accessories)

Can be plugged into a solar system, using a home circuit, or solar powered. Note that we cannot transport the batteries and need to prepare the batteries yourself.

Installation Details

Preparation before installation

1. Prepare the electric drill for drilling, the motor arm needs to be fixed on the wall or wood

2. Prepare power protectors, lightning protection switches, power strips, and home wiring cables

3. Some line protection tubes can be prepared

4. If it is an iron gate, you need to prepare electric welding if necessary.

Door Stop

It is necessary to install a rubber stopper at the bottom of the gate.

It is recommended to install in the horizontal position at the bottom of the door, 5cm away from the door opening direction

Smart Control Center

Function indication of corresponding port

1. 2 SIDE terminal is used for connecting any external device that operates double gate

2. COM terminal is COMMON used for connecting the ground” of external devices

3. 1 SIDE terminal is used for connecting any external device that operates single gate

4. Swipe Card terminal is used for connecting any external devices that will operate to open the gate

5. COM terminal is COMMON used for connecting the ground” of external devices

6. Infrared terminal is used for connecting photo electric sensor

7. 12V DC output is used for connecting photo electric sensor (Continuous output current

8. 24V battery output is used for connecting the back up battery +

9. 24V battery output is used for connecting the back up battery

10. 24V DC output is used for connecting external device. (such as photo electric sensor, max current output 1A)

11. GND is used for connecting the ground” of external devices

12. 24V DC lamp output is used for connecting flash light +.

13. 24V DC lamp output is used for connecting flash light -.

14. 24V DC lock output—the NF terminal which used for connecting the electric lock

15. COM is COMMON used for connecting the ground” of lock

16. 24V DC lock output—the NA terminal which used for connecting the magnetic lock

17. 24V DC alarm output

18. 24V DC alarm output

19. and 20. Motor1 terminal is used for connecting the motor 1 installed on the gate that opens later and close first. This terminal connect 1st red wire (counted from your left hand side to right hand side)

21. and 22. Motor2 Delay terminal is used for connecting the motor 2 installed on the gate that opens first and close later. This terminal connect 1st blue wire (counted from your left hand side to right hand side). NOTE! If for single gate, the gate motor just can connect the Motor2 Delay terminal.