Xhorse VVDI BE Key Pro Improved Version For Benz Smart Key Shell 3 Buttons 4 Buttons XNBZ01EN XNBZT1GL for VVDI MB Tool

XhorseBE Key Pro Improved Version Yellow Board 315Mhz/433Mhz + Key Shell 3/4 Button Red Panic for Mercedes Benz

Notice: the key shell without logo

VVDI MB BE Key Yellow Board vs Green Board

1. The yellow board does not contain 200 bonus points, and it can be Programmed by all kinds of MB key programmer, such as Autel IM608, CGDI and VVDI MB, Key Tool Plus, Digimaster-III,CKM100, AK500, MBE MB-KEY OBD2, NEC-57 MB-PRO and so on

2. The yellow board contains 200 bonus points to exchange 1 token, and it work with xhorse vvdi mb tool.

Xhorse BE smart key

The ways to reset the frequency

1) with the PCB SMD resistor.Weld the 1K SMD resistor on the position the arrow points and the frequency is 315MHZ, after remove it will be 433.92MHZ.

2) Change frequency between 315MHz and 433MHz with VVDI MB Tool.

Check detail guide here: How to Change Benz VVDI BE Key Pro Frequency?

There are 2 ways to change Xhorse VVDI BE key frequency between 315 MHZ and 433MHZ. Xhorse BE key is designed to work with VVDI MB Tool and other MB key programmers.

1: Change VVDI BE key frequency with PCB resistor

Weld the 1K SMD resistor on the position the arrow points and thefrequency is 315MHZ, after remove it will be433.92MHZ.

2. Change XHorse BE key frequency with VVDI MB Tool

In VVDI MB software, select Set key remote frequency.

Choose 433MHz and set frequency

Change frequency to 433MHz success

Xhorse VVDI BE Key Pro Features

More compatibility

New design

High Stability

High reliability

Digital Signature

High quality with a reasonable price

No points will be accumulated

VVDI BE Key Pro improvements

1. Fix the bug that W164/W639 EIS data doesn't synchronize the key.

2. Fix the bug that the BE key fails to turn on the ignition after repeat try.

3. Fix the bug of trunk remote open

4. Fix the bug that the BE key only sent RF signal for one time, after update, the RF signal can be sent for two times when press and release the key.

5. Modify the rolling algorithm, fix some errors of BE key.

6. Add pre-roll algorithm: the HASH value can roll ahead.

7. Adopt car-grade quartz crystal, improve infrared communication stability.

8. Boost the infrared signal when you press the button.

9. Support resetting the key frequency between 315MHZ and 433.92 in the way of VVDI MB tool or the PCB SMD resistor

Note: VVDI MB tool has priority over the SMD resistor, which means if you reset the key frequency with VVDI MB tool at first, the SMD resistor won't work, and you need to use the VVDI MB tool to erase the frequency then use the SMD resistor.

Package includes

1pcs x VVDI BE key Pro yellow version+ Key Shell

How to assemble the case with VVDI BE key Pro improved version board?

This post shows the general guide on how to assemble VVDI BE Key Pro imrpoved versionwith the Smart Key Shell 3 Button for Mercedes Benz.

1.Put the VVDI BE key Pro improved version PCB into the case.

2.Cover the bottom case.

3.Insert the battery and cover the case.

4.Push the metal strips on both sides into the right position.

If the rear metal component is first assembled, then the metal strips on both sides won't be able to pushed into the right position.

5.Here rearmetal button.

6.Put into the small key and start button.

If you want to disassemble the case, please do it from the last step to the first step.

Note:If the rear metal component is firstly assembled, then the metal strips on both sides won't be able to put into the right position.