Nohawk 600M 1000Y Golf Laser Rangefinder for Hunting Range Finder With Slope Compensation for Golfer Monoculars Distance Meter

Nohawk 600M 1000Y Golf Laser Rangefinder for Hunting Range Finder With Slope Compensation for Golfer Monoculars Distance Meter

Precautions

1.This is a long distance rangefinder. The measurement distance is at least 5 meters.

2. Glass reflects the laser light and affects the measurement results.Do not measure through glass during measurement.

3.Rainy, foggy, dusty weather, and severe air pollution can affect laser transmission and measurement results.

4. Low-light conditions at night necessitate additional lighting to view the readings, since the eyepiece display lacks illumination.

5.Any problem send customer service information in time. Give you to solve all the problems.

Units of measure: M/Yard—manually switchable（Press and hold the measurement button and M button at the same time for 3-5 seconds to switch）

Multifunction Rangefinder：

Power supply mode

600M/Yard CR-2 (3v) non-rechargeable battery. It is recommended that you purchase CR-2 (3v) rechargeable battery in advance.

PLEASE NOTE

You have purchased this model-600M/Yard CR-2 (3v) of rangefinder with a built-in CR battery.

We usually ship the battery with 1 layer of transparent insulating material on the outermost layer.

Please tear off its protective layer before you use it!!!!!!

1000M/Yard USB is rechargeable and the charging input voltage is limited to 5V1A or less

Function: There are instructions at the bottom

1. Linear distance measurement

2. All-in-one machine mode (angle/height/horizontal distance)

3. Scan mode

4. Two-point height measurement mode

5. Speed measurement mode

6. Golf mode (with slope compensation)

7. Data storage function

Press mode button to switch the storage function,display shows "Lb". Press power button continuously to view the data.

Application: multi-function monocular rangefinder application, hunting/golf/frisbee golf/building construction/altitude measurement/speed measurement...

Golf version

1. Angle switch manual control

2. Linear distance measurement

3. Slope compensation function

4. Flagpole scanning and locking function

3. Vibration mode: Vibration after the flagpole is locked

Multifunctional version

6. Golf mode (with slope compensation but NO Angle switch!)

Power supply: According to the picture.

USB rechargeable lithium battery version

CR-2(3V) version, it is recommended to purchase rechargeable CR batteries in advance for long-term use.

600M/Yard Golf Rechargeable-Professional golf version - cost-effective, with zip bag

How does the rangefinder cause the lock fag to vibrate?

In Golf Mode.

1. measure the background of the slope behind the flag.

2. Press and hold the Measure button (to enter Scan Mode) and slowly move from the background toward the flag. The rangefinder will recognize the flag and the flag logo will flash and vibrate.

3. The distance to the flag and the slope compensation distance are displayed.

Hunting NKM-600M Rechargeable, built-in lithium battery USB charging

Unit: M/Yard (press and hold the measurement button and the M button for 2 seconds to switch)

Suitable for hunting outdoor sports camping. Camouflage appearance, high cost performance hunting rangefinder.

Product Size:96x34x67MM/3.78x1.34x2.64in

Black-NP-1000M with zipper bag:Large-size color side screen, customizable start-up screen, more convenient touch button operation, intelligent voice broadcast, you can get measurement data without watching the screen, three versions in English, Chinese and Japanese are optional, multiple measurement modes (area, volume measurement, measurement High angle measurement speed), multi-function can meet a variety of industrial scenariosProduct

Size:109x40x70MM/4.30x1.58x2.76in

Rangefinder Operating Manual, Multifunction Version

Unit M/Yard switching method: Press and hold the two keys at the same time for about 2 seconds to switch between meters and yards

The machine has a total of two keys: power button, mode button, after power on, the power button is used as a measurement button

The first mode: single ranging

Press the power button to turn on the machine. After the machine is turned on, this key is used as a measurement key. The target is aligned with the target object. Press the measurement key to directly measure the distance from the objective lens to the target object.

After power on, press the mode button to switch to the second mode

The second mode: all-in-one mode

Aim at the target and press the measurement button, the data from top to bottom are angle, slant distance (M), vertical height (High) between the target and the measuring point (machine position), horizontal distance between the target and the measuring point (Level )

After booting, press the mode button twice

The third mode: SCAN scanning mode

In this mode, press the measurement button once to continuously measure different targets without repeatedly pressing the measurement button, and the measurement results will be continuously updated on the display

Press the mode button three times after power on

The fourth mode: H2 two-point height measurement

In this mode, aim at the lowest point of the target and press the measurement button, the data under the target will flash, then press the measurement button at the highest point of the target, the data from top to bottom are angle, slant distance (M), target The height of the object (High), the horizontal distance between the target object and the measuring point (Level)

Press the mode button four times after powering on

The fifth mode: SP speed measurement mode

The speed measurement mode can measure the speed of the radial moving object, and use the distance of the object to be measured twice and the measurement time interval information to calculate the speed of the target object, which cannot be measured in parallel.

Press the mode key five times after powering on