Dental High Speed Schneiden Drehmaschine Maschine 180 W 20000 rpm 220 V/110 V Motor Zahnmedizin Labor Ausrüstung Bohrer werkzeuge Produkte

Produktbeschreibung

Dental high-speed cutting machine gear technology worker polishing cutting machine frame head
This machine uses a single-phase AC motor, no matter there is no load or load, there will be different degrees of induction electricity, this is a normal phenomenon.
For this reason, the input power supply is required to have a contact wire function. If there is no ground wire function, and the induction value is found to be significantly higher (above 60) after turning on the machine, please insert the plug hole in the opposite direction.
High-speed cutting machine
Power supply voltage: 220V/50HZ; 110V/60HZ
Power supply power: 180W
Motor speed: 2800 rpm
Dimensions: 30*32*26cm
Whole machine weight: 16KG
Temperature: 0~150 degrees
Instructions
Connect the power socket to the corresponding power source 220V, 50Hz/(110V 60Hz), make sure that the motor is running normally and the work light is turned on normally. If found
If the running noise is abnormal, please remove the belt cover.
1. Loosen the fastening screw of the machine head with an accessory hex wrench, and check whether the motor pulley and the driven wheel of the machine head are straight. Move the in and out of the machine head to adjust it.
2. Turn the machine head slightly by hand to adjust the tightness of the belt, then fix it, and then start the switch to observe the running status to minimize the noise and achieve the best
Operating status.
Special attention: In any case, it is strictly forbidden to start the motor without any support in the machine head to avoid damage to the machine head.
This product may be intended for use by a health care professional use only. The seller may ask you to evidence you are a qualified health care professional entitled to buy and use such products in your country.

Produktdetails in Bildern

Produkteigenschaften

Markenname

GOEK

Handinstrument

Nein

Hochbetriebenes Chemikalienunternehmen

Keine

Material

Metall

Ursprung

CN (Herkunft)

Zertifizierung der Warenqualität

FDA

Zertifizierung der Warenqualität

ce

Zertifizierung der Warenqualität

3C

Modellnummer

JT-24B

Größe

220V/110V

Power

180W

Potational Speed

2800rpm

Motor Speed

20000rpm

Dimensions

34*32*26cm

Weight

16kg