1/2" Wasserdurchflusssensor 1,75 MPa Hall-Sensor Turbinen-Durchflussmesser DC5~18V Wird zur Messung des Durchflusses des Mediums verwendet

Produktbeschreibung

Product parameter
The water flow sensor is mainly composed of a plastic valve body, a water flow rotor assembly, a steady flow assembly and a Hall element. It is installed at the water inlet end of the water heater to detect the flow rate of the inlet water. When the water passes through the water flow rotor assembly, the magnetic rotor rotates, and the speed changes linearly with the flow rate. The Hall sensor outputs the corresponding pulse signal and feeds it back to the controller. The controller judges the size of the water flow and regulates it.
Output signal: the default output NPN pulse signal (if you need to connect to the PLC, please contact customer service before placing an order).
Model: YF-S201
Interface size: 1/2"
Working voltage range: DC 5～18V
Inner diameter/outer diameter: 10.9mm/20mm
Thread length: 14.5mm12.5mm
Material: Nylon
Medium temperature: ≤120℃
Water pressure resistance: ≤1.75MPa
Output pulse high level: >DC 4.5V (input voltage DC 5V).
Output pulse low level: 100MΩ
Flow range: 1/2"(1~30 L/min within 3% within)
Tightness: Close each hole, add 1.7Mpa water pressure test for 1 minute without leakage and deformation.
Flow pulse characteristics: F=(7.5*Q) error ≤3%
Notice
1. The more you order, the more offers, please contact us.
2. Package list: Water flow sensor*1pc
3. Wiring mode

Produktdetails in Bildern

Produkteigenschaften

Markenname

Acarps

Hochbetriebenes Chemikalienunternehmen

Keine

Ursprung

CN (Herkunft)

Struktur

control

EU LVD-Spannung

Niederspannung: Unter 50 VAC oder 75 VDC

Portgröße

1/2"

Stromquelle

Gleichstrom

Standard oder Nichtstandard

Standard

Medien

Wasser

Zertifizierung

CE

Material

Kunststoff

Modellnummer

YF-S201

Temperatur der Medien

hohe Temperatur

Druck

Niedriger Druck

Aktuatormodus

Ohne Handbuch und Anleitung

Kraft

MAGNET

Output signal

the default output NPN pulse signal (if you need to connect to the PLC, please contact customer service before placing an order)

Working voltage range

DC 5~18V

Medium temperature

��120℃

Water pressure resistance

��1.75MPa

Output pulse high level

>DC 4.5 V (input voltage DC 5V)

Output pulse low level

<DC 0.5 V (input voltage DC 5V)

Insulation resistance

>100MΩ