SMH-P16 Lager 40*52*7mm 45/45 ( 1 PC ) MH-P16 Bälle Fahrrad 1-1/2 Zoll Headset Reparatur Teile Edelstahl Kugellager

Produktbeschreibung

TECHNICAL SPECS
Item: SMH-P16
Closures: 2RS Sealed
Structure: Ball Bearing
Inside And Outerside Bevel: 45/45
Dimensions: 40 x 52 x 7 mm
ID (inner diameter): 40 mm
OD (outer diameter): 52 mm
Width: 7 mm
Quantity: 1 Lot = 1 PC
Vacuum Packaging
Grease
They are characterized by excellent water resistance and load-carrying properties and help provide long-term protection against rust and corrosion.
Bearing Installation and Removal
Bearings should never be installed by pressing on the inner race.
Always press on the outer race with a pilot bushing or similar tool, which will only make contact with the metal side of the outer race.
A bearing press or similar should be used to exert the force needed to press the bearing into the housing.
Ensure that the seating surface is clean and free from rough edges so that they fit true and square.
Quite often bearings can feel fine before fitting, but then feel "notchy" or "rough" after fitting. This is almost always due to the bearings not sitting square and true.
Care needs to be taken that the bearing is started straight and not at an angle to the housing.

Produktdetails in Bildern

Produkteigenschaften

Markenname

FUSHI

Hochbetriebenes Chemikalienunternehmen

Keine

Ursprung

CN (Herkunft)

Modellnummer

Stainless Steel Ball Bearings 40x52x7 mm

ist kundenspezifisch

Ja

Zertifizierung

RoHS-Konformität

Zertifizierung

NONE

Material

Wälzlagerstahl