0,3–2 mm, 75 W, 12000 U/min, Abisoliermaschine aus emailliertem Kupferdraht, elektrisches Farbschaber-Werkzeug, DF-8 lackierter Abisolierer

Produktbeschreibung

Tips for using
1. When the enameled wire is of different specifications, the adjustable speed potentiometer can be adjusted. The wire diameter is adjusted in the slow direction, and the wire diameter is adjusted in the fast direction. When the paint film is not peeled off, the speed is increased until it is scraped. If the enameled wire is scratched by a knife during speed regulation, the speed should be reduced until it meets the requirements.
2. When scraping the paint to the end of the enameled wire, do not immediately disengage the three-jaw blade at the end of the enameled wire. The intersection of the cutting edge should wait for the tool to stop rotating and then disengage, so as not to rotate, the enameled wire suddenly breaks off the cutting edge and damages the cutting edge.
3. The shell is made of voltage-resistant plastic material, which is safe and reliable.
4. Before painting, it must be straightened by hand to avoid the enameled wire pair not being centered.
5. After using for a long time, if the power is not available, the safety cover can be unscrewed to remove the peeled paint film powder.
Package include:1pc*Enameled Wire Stripping Machine

Produktdetails in Bildern

Produkteigenschaften

Markenname

NONE

Ursprung

CN (Herkunft)

Handausrichtung

beidhändig

Hochbetriebenes Chemikalienunternehmen

Keine

Heimwerkerbedarf

elektrisch

Material

Edelstahl

Merkmale

Explosionsgeschützt

Griffstil

Gebogen

Anwendung

Multifunktional

ist kundenspezifisch

Nein

Modellnummer

Enameled Wire Stripping Machine

Typ

Minizangen

product number

LC1059